About the MPI APL Product Sort By MPI Number Product Sort By Type
| MPI # 77 Epoxy, Gloss | NEXT→ | ||
| A solvent based, gloss, two component, epoxy coating specified for wall and floor surfaces in moderate to heavy traffic commercial and moderate industrial environments. Must be resistant to incidental splash and spillage of dilute (5%) sulfuric acid, (15%) hydrochloric acid, (20%) sodium hydroxide, gasoline and heavy duty cleaners and detergents. Used as a self-priming material on smooth, low porosity concrete, masonry and wood surfaces. On concrete masonry units (blocks) MPI #4 Latex (dry areas) or #116 Epoxy (damp areas) block fillers are used as the first coat. On ferrous and galvanized metals, a primer such as MPI #20 Epoxy Zinc Rich, #101 Epoxy Anti-Corrosive and #19 Inorganic Zinc rich primers. On non-ferrous metals MPI #80 Etch Type Primer is specified. This epoxy shall be able to be applied at temperatures ranging from 15° to 40° C and a maximum relative humidity of 80%. Application is generally by spray, but in areas where spray is impractical, a brush or roller may be used. | ||||
| MPI VOC Ranges (grams/L) | E3 <251 g/l | E2 251 - 420 g/l | E1 421 - 500 g/l | E '0' - outside range, n/a - unavailable |
 meets GPS-1 for Standard Category: Industrial Maintenance Coatings  meets RG (OTC or EC) meets LEED 2009 (excluding LEED for schools) |
||||
| Default Filter▼ | OTC/EC filter▼ | Leed Filter▼ | GPS-1 Filter▼ | GPS-2 Filter▼ |
|---|
| Listing Mfr | Label | Product Name | Code | OTC/EC
|
Leed
|
EPR | GPS-1 | GPS-2
|
Region
|
|
|---|---|---|---|---|---|---|---|---|---|---|
| Samhwa Paint | Samhwa Paint | MPI 77 Superpoxy 200 | 3200126 | 1 |
US/CA
|
|||||
| Sherwin-Williams | Protective & Marine | Tile-Clad HS Epoxy | B62WZ111/B60VZ70 | 2 |
US
|
|||||
| Sherwin-Williams | Pro Industrial | High Performance Epoxy | B67-200 Series | 3 |
|
|
US/CA
|
|||
| Noroo Paint & Coatings | NOROO | Cleanpoxy 3100 | NA | 2 |
AA
|
|||||
| Noroo Paint & Coatings | MPI 77 | Cleanpoxy 3100 | NA | 2 |
AA
|
|||||
| KCC Corporation | KOREPOX TOPCOAT ET574 | KOREPOX TOPCOAT ET574 | AE5017M | 1 |
AA
|
|||||
| Sherwin Williams de C.A. | Kem Cati Coat Enamel | Esmalte Industrial Epoxico Kem Cati Coat Brilliante Blanco | B69W36K | 1 |
MX
|
|||||
| Jotun U.A.E. | Jotafloor Topcoat | Jotafloor Topcoat | 502 | 1 |
ME
|
|||||
| Cloverdale Paint | High Performance | ClovaCoat 300 Epoxy High Gloss White | 83300 | 2 |
|
|
US/CA
|
|||
| Sur Química S.A. | Becc Protective & Marine Coatings | EPOBECC ESMALTE EPÓXICO INDUSTRIAL | 521-86073 | 1 |
SA
|
|||||
| Al-Jazeera Factory | Al-Jazeera Epoxy Finish | Al-Jazeera Epoxy Finish | JI-68004 | 1 |
ME
|
A subsidiary of AMPP
Dedicated to advancing the painting and coatings application industry through quality standards and quality assurance.
