About the MPI APL Product Sort By MPI Number Product Sort By Type
| MPI # 158 Dry Fall, Water Based, for Galvanized Steel, MPI Gloss Level 5 | NEXT→ | ||
| A water based coating, designed for direct application to cleaned, interior galvanized metal ceiling surfaces and adjacent primed metals. Overspray will dry to a sweepable powder over a short distance for easier clean up. Specified for use in non-chemical and in non-humid environments such as warehouses. Minimum recommended surface preparation for galvanized surfaces is a solvent cleaning and test for chromate passivation, with an SSPC SP 7 Brush-off blast cleaning if required. It is recommended that smooth, spangle galvanized metals receive a SSPC SP 7 cleaning. Application methods include: airless and/or conventional spray equipment. Note: Chemical-etching cleaners such as MPI # 25 may be substituted for solvent washing and SSPC-SP 7 cleaning. (Gloss @ 60°: 25 - 70 units). | ||||
| MPI VOC Ranges (grams/L) | E3 <51 g/l | E2 51 - 100 g/l | E1 101 - 150 g/l | E '0' - outside range, n/a - unavailable |
EPR - Environmental/Performance Rating (VOC & Relative Performance of Category+Gloss & Appropriate Specified Use).  meets GPS-1 for Standard Category: Interior Architectural Non-Flat Intermediate/Top Coats  meets RG (OTC or EC) meets LEED 2009 (excluding LEED for schools) |
||||
A subsidiary of AMPP
Dedicated to advancing the painting and coatings application industry through quality standards and quality assurance.
